Toyota Hilux IFS 4 Inch Profender Nitro Gas Lift Kit

This IFS Hilux has been fitted with the following 4×4 suspension components and accessories:

  • Toyota Hilux IFS 4 Inch Profender Nitro Gas Lift Kit (Stage 1)
  • Toyota Hilux IFS Diff Drop Kit
  • Toyota Hilux IFS Upper Control Arms

4 Inch Nitro Gas Profender Lift Kit (Stage 1)

Superior Engineering has put together a budget 4 inch lift kit to suit current model Hilux’s / Vigo With Profender Nitro Gas shock absorbers and front struts.

The kit comprises of the following parts:

  • 2 x Rear leaf springs
  • 2 x Front coil springs
  • 4 x U-bolts
  • 12 x Poly bushes
  • 2 x Extended rear shackles
  • 2 x Front Profender Nitro Gas struts
  • 2 x Rear Profender Nitro Gas Shocks
  • 1 x Extened rear brake line (2012 on models with traction control will need 2 x rear brakelines)
  • 1 x Swaybar relocation kit
  • 1 x Diff drop kit
Nitro Gas Profender Lift Kit (Stage 1)
Nitro Gas Profender Lift Kit (Stage 1)
Right side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit
Right side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit
Side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit
Side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit

Warning: When lifting an IFS vehicle over 2″ it will not drive or handle the same as a factory height vehicle. Additional noise, wear & tear and maintenance can be expected. For more information on how this kit may affect your vehicle please contact us (07) 5433 1411.

Find Out More About This Kit

Diff Drop Kit to Suit Toyota Hilux 2005 to Current Model

The diff drop brackets are designed to drop the diff lower to fix the cv angle.

If you have lifted your Toyota Hilux (2005 onwards) truck this Diff Drop Kit will allow the re-alignment of the diff reducing wear on your CV Joints.

Superior Engineering Diff Drop Kit to Suit Toyota Hilux 2005 to Current Model
Superior Engineering Diff Drop Kit to Suit Toyota Hilux 2005 to Current Model
View This Diff Drop Kit Online

Upper Control Arms (UCA’s) For Toyota Vigo / Hilux

These upper control arms are designed to correct the balljoint angle when you lift your vehicle over 2″ inches.

Superior Engineering have also allowed clearance for the coil to clear the arms during articulation and strengthened the whole unit over the standard parts.

These arms are made in Australia by Superior Engineering to suit the needs of the Australian market.

Made from 38.1 mm OD Heavy wall 4130 Chromoly tube and then powder coated in a hard wearing silver finish.

Durable poly bushes are used at the chassis end and we use the highest quality FK bearing joints at the wheel end, allowing for the maximum range of movement without binding.

All moving joints are greasable for a long service life.

Superior Engineering  Upper Control Arms (UCA) For Toyota Vigo / Hilux
Superior Engineering Upper Control Arms (UCA’s) For Toyota Vigo / Hilux
Superior Engineering  Upper Control Arms (UCA) For Toyota Vigo / Hilux
Superior Engineering Upper Control Arms (UCA’s) For Toyota Vigo / Hilux
Call (07) 5433 1411

Comments

  1. Marc [Customer] May 04, 2015 at 7:28 am

    Subject: Toyota Hilux IFS 4 Inch Profender Nitro Gas Lift Kit

    Hi.

    Could you send me a quote please for hilux vigo 2011, 4 door.

    1. Profender 4×4 [Post Author] May 04, 2015 at 12:31 pm

      Hi Marck

      The kit you are looking at is as follows:

      • 2 x Rear leaf springs
      • 2 x Front coil springs
      • 4 x U-bolts
      • 12 x Poly bushes
      • 2 x Extended rear shackles
      • 2 x Front Profender Nitro Gas struts
      • 2 x Rear Profender Nitro Gas Shocks
      • 1 x Extened rear brake line (2012 on models with traction control will need 2x rear brakelines)
      • 1 x Sway Bar Relocation Kit
      • 2 x Superior Engineering Upper Control Arms
      • 1 x Diff Drop Kit

      We have emailed you a price for the lift kit, including fitting and free freight. Please refer to the email.

      Regards Chris

4 thoughts on “Toyota Hilux IFS 4 Inch Profender Nitro Gas Lift Kit”

  1. For this 4″ lift kit, are the front struts factory length? What is the length on the rear shocks (extended)? Thanks, looking to replace them now.

    1. Good morning, thank you for your enquiry, unfortunately the particular shocks you have enquired about are no longer available, the 4 inch kit we do have which is a nitro gas non remote res would be our superior engineering nitro gas skit which I have attached the link to our website for your perusal. The front struts are factory length and to get the height up to 4inch the spring seat height is raised to preload the coil. The open length of the rear shock is 630mm and closed is 395mm
      https://www.superiorengineering.com.au/4×4-suspension/shock-absorbers/superior-engineering-nitro-gas-40mm-shock-rear-2-3-4-inch-lift-25592?filter=236,355&limit=120

  2. Thank you for the information about Hilux nitro gas suspension lifts.

    I like how having a 4×4 suspension allows the driver to have better control when on different terrains other than asphalt.

    That is something I definitely need for my car.

    I go mudding a lot here in Florida and it is so much fun. It would be even more fun if I had a 4×4 suspension to make the vehicle easier to control.

    Could you send me the price and any more information for for this kit?

Leave a Reply

Your email address will not be published. Required fields are marked *