Tag Archives: toyota

200 Series Toyota Landcruiser 2 Inch Lift Kit

Superior Engineering has put together a premium 2 inch suspension kit to suit the 200 Series Toyota Landcruiser. The setup features the top of the range Profender 4×4 Adjustable Remote Reservoir shock absorbers and front struts.

The kit comprises of the following suspension parts:

  • 2 x Rear coil springs
  • 2 x Front coil springs
  • 2 x Front Profender Monotube Remote Reservior struts
  • 2 x Rear Profender Monotube Remote Reservior shocks
  • 2 x Superior Upper Control Arms
  • 1 x Superior Diff Drop Kit
  • 2 x Airbag Man Coil Air Kevlar Outer Protectors
  • 2 x Superior Rear Lower Control Arms
  • 1 x Superior Rear Panhard Rod

Features & Highlights – Remote Reservoir Shocks

  • Fully rebuildable – Profender 4×4 Remote Res shocks are fully Rebuildable, Serviceable and Upgradeable. All parts are carried in stock and allow the user to finely-tune, adjust and service their shocks, ensuring you get the longest life possible from your suspension.
  • High Quality Materials – CR3+ plated Bored and Honed cylinder tubes, Aircraft quality billet aluminium components, High pressure hydraulic hose and seals. Plus the 20mm Hard-chromed shafts are designed for maximum strength and durability in lifted and performance applications.
  • Remote Reservoir Canister – Remote Reservoir Canister for increased oil volume, and greater cooling capacity. Internal Floating Piston separates the shock Oil and Nitrogen eliminating Foaming or mixing of the oil and gas that produces shock fade.
  • Spherical Rod End Assembly – Strut – High performance spherical rod end assembly designed for correct clearance and increased strength to suit your application. Fitted with Teflon-lined Commercial Grade spherical bearings for smooth articulation and longest life.
  • Heat Treated Alloy Steel Piston – Features race inspired port configurations and variable rate shim stack technology to provide vehicle specific damping performance and optimum ride quality. A composite Teflon wear band offers low internal resistance and high compressive strength enhancing shock performance.
  • Fully Adjustable For Complete Control – 8-Stage Compression Adjuster reservoir gives you the ability to precisely adjust compression from soft to firm with the simple twist of a knob. Allowing you to soften the ride when just cruising or firm up the compression when tackling rough terrain or carrying a load.
Buy This Kit Online

Gallery

Right side view of a 200 Series Toyota Landcruiser after being fitted with a premium 2 inch Profender 4x4 lift kit
Right side view of a 200 Series Toyota Landcruiser after being fitted with a premium 2 inch Profender 4×4 lift kit

Front right view of a 200 Series Toyota Landcruiser after being fitted with a premium 2 inch Profender 4x4 lift kit
Front right view of a 200 Series Toyota Landcruiser after being fitted with a premium 2 inch Profender 4×4 lift kit

Closeup view of a Profender 4x4 Adjustable Remote Reservoir Strut, Blue Coil Spring and Superior Engineering Upper Control Arm fitted to the a 200 Series Toyota Landcruiser
Closeup view of a Profender 4×4 Adjustable Remote Reservoir Strut, Blue Coil Spring and Superior Engineering Upper Control Arm fitted to the a 200 Series Toyota Landcruiser

Closeup view of a heavy duty fixed Superior rear lower control arm fitted to a current model 200 Series Toyota Landcruiser 4WD
Closeup view of a heavy duty fixed Superior rear lower control arm fitted to a current model 200 Series Toyota Landcruiser 4WD

Closeup view of a premium Profender Remote Reservoir securely fitted via a res mount on the 200 Series Toyota Landcruiser 4WD
Closeup view of a premium Profender Remote Reservoir securely fitted via a res mount on the 200 Series Toyota Landcruiser 4WD

Closeup view of a premium Profender Remote Reservoir and hose securely fitted via a res mount on the 200 Series Toyota Landcruiser 4WD
Closeup view of a premium Profender Remote Reservoir and hose securely fitted via a res mount on the 200 Series Toyota Landcruiser 4WD

A single premium adjustable Profender 4x4 Remote Reservoir shock absorber with eye to eye mounts on a plain white background
A single premium adjustable Profender 4×4 Remote Reservoir shock absorber with eye to eye mounts on a plain white background

A single premium adjustable Profender 4x4 Remote Reservoir front strut with pin to eye mounts on a plain white background
A single premium adjustable Profender 4×4 Remote Reservoir front strut with pin to eye mounts on a plain white background
Comment Below For More Information

Toyota FJ Cruiser Profender 3 Inch Lift Kit Stage 2

Superior Engineering have put together a custom built 3″ inch Profender 4×4 suspension kit to suit the current model Toyota FJ Cruiser with Profender Monotube Remote Reservoir rear shocks and front struts.

This best selling lift kit includes the following 4×4 accessories and suspension parts:

  • 2 x Front Dobinson Coils
  • 2 x Rear Dobinson Coils
  • 2 x Front Profender Adjustable Monotube Remote Reservoir Struts
  • 2 x Rear Profender Adjustable Monotube Remote Reservoir Shocks
  • 1 x Diff Drop Kit
  • 1 x Brake Proportioning Valve Bracket
  • 1 x Swaybar Relocation Plate Kit
  • 2 x Superior Engineering Upper Control Arms (UCA’s)


Buy This FJ Cruiser Lift Kit Online

Side angle view of a black Toyota FJ Cruiser fitted with a Profender 3 Inch Lift Kit (Stage 2)
Side angle view of a black Toyota FJ Cruiser fitted with a Profender 3 Inch Lift Kit (Stage 2)

Side view of a current model black Toyota FJ Cruiser fitted with a Profender 3 Inch Lift Kit (Stage 2)
Side view of a current model black Toyota FJ Cruiser fitted with a Profender 3 Inch Lift Kit (Stage 2)

Front on view of a Toyota FJ Cruiser fitted with a heavy duty Profender 3 Inch Lift Kit (Stage 2)  from Superior Engineering
Front on view of a Toyota FJ Cruiser fitted with a heavy duty Profender 3 Inch Lift Kit (Stage 2) from Superior Engineering

Rear view of a Toyota FJ Cruiser fitted with a heavy duty Profender 3 Inch Lift Kit (Stage 2)
Rear view of a Toyota FJ Cruiser fitted with a heavy duty Profender 3 Inch Lift Kit (Stage 2)

Underside view of the diff area showing the Dobinsons coil springs, Profender shocks, remote res mounting points which is fitted to the FJ Cruiser
Underside view of the diff area showing the Dobinsons coil springs, Profender shocks, remote res mounting points which is fitted to the FJ Cruiser

Closeup view of a Superior Engineering front upper control arm, Profender remote res shock, swaybar relocation palte and Dobinson coil springs fitted to the FJ Cruiser
Closeup view of a Superior Engineering front upper control arm, Profender remote res shock, swaybar relocation palte and Dobinson coil springs fitted to the FJ Cruiser

Closeup view of a blue Dobinson coil spring, remote res shock absorber and factory bump stop on a FJ Cruiser
Closeup view of a blue Dobinson coil spring, remote res shock absorber and factory bump stop on a FJ Cruiser

Warning: When lifting an IFS vehicle over 2″ inches it will not drive or handle the same as a factory height vehicle. Additional noise, wear, tear and maintenance can be expected. For more information on how this kit will apply to your vehicle please call one of our sales staff on (07) 5433 1411.


Contact Us (07) 5433 1411

Toyota Hilux 3 Inch Profender Lift Kit Stage 2

Superior Engineering have put together a premium 3″ inch Profender 4×4 suspension kit to suit the current model Toyota Hilux / Vigo with Profender Monotube Remote Reservoir rear shocks and front struts.

This highly sought-after lift kit includes the following 4×4 accessories and suspension parts:

  • 2 x Rear leaf springs
  • 2 x Front coil springs
  • 4 x U-bolts
  • 12 x Poly bushes
  • 2 x Greaseable rear shackles
  • 2 x Front Profender Adjustable Monotube Remote Reservior Struts
  • 2 x Rear Profender Adjustable Monotube Remote Reservior Shocks
  • 1 x Sway Bar Relocation Kit
  • 2 x Superior Engineering Upper Control Arms (UCA’s)
  • 1 x Diff Drop Kit

When ordering this style of lift kit, you will need to discuss the front and rear spring rates to suit your application.

This kit also levels out the suspension by lifting the front higher than the rear. Generally the rear will be lifted by 1″ less to match the front and giving a more even ride height.

Note: This is a stage 2 kit variant of the stage 1 kit.

Warning: When lifting an IFS vehicle over 2″ inches it will not drive or handle the same as a factory height vehicle. Additional noise, wear, tear and maintenance can be expected. For more information on how this kit will apply to your vehicle please call one of our sales staff on (07) 5433 1411.


Buy This Kit Online

Front view of a Toyota Hilux with a 3 Inch Profender Lift Kit Stage 2
Front view of a Toyota Hilux with a 3 Inch Profender Lift Kit Stage 2

Front side angle view of a Toyota Hilux dual cab fitted with a 3 Inch Profender Lift Kit Stage 2
Front side angle view of a Toyota Hilux dual cab fitted with a 3 Inch Profender Lift Kit Stage 2

Side view of a Toyota Hilux dual cab ute fitted with a 3 Inch Profender suspension kit
Side view of a Toyota Hilux dual cab ute fitted with a 3 Inch Profender suspension kit

Rear Profender Adjustable Monotube Remote Reservior Shock and heavy duty leaf spring fitted to the Toyota Hilux
Rear Profender Adjustable Monotube Remote Reservior Shock and heavy duty leaf spring fitted to the Toyota Hilux

The Remote Reserviors mounted to underside of the Hilux
The Remote Reserviors mounted to underside of the Hilux

The Remote Reserviors securely fixed to underside of the Toyota Hilux Dual Cab
The Remote Reserviors securely fixed to underside of the Toyota Hilux Dual Cab

A set of fitted rear Profender Adjustable Monotube Remote Reservior Shocks
A set of fitted rear Profender Adjustable Monotube Remote Reservior Shocks

A set of fitted rear Profender Adjustable Monotube Remote Reservior Shocks on a current model hilux
A set of fitted rear Profender Adjustable Monotube Remote Reservior Shocks on a current model hilux


Contact Us (07) 5433 1411

Toyota Prado 120 3 Inch Profender Lift Kit Stage 2

We have put together a 3″ inch Profender 4×4 suspension kit to suit the Toyota Prado 120 with Profender Monotube Remote Reservoir rear shocks and front struts.

The lift kit comprises of the following parts:

  • 2 x Front Superior Coils
  • 2 x Rear Superior Coils
  • 2 x Front Profender Adjustable Monotube Remote Res Struts
  • 2 x Rear Profender Adjustable Monotube Remote Res Shocks
  • 1 x Diff Drop Kit
  • 1 x Brake Proportioning Valve Bracket
  • 1 x Sway Bar Relocation Plate Kit
  • 2 x Superior Engineering Upper Control Arms (UCA’s)

For more information on how this kit will apply to your vehicle please call one of our sales staff on (07) 5433 1411.

Warning: When lifting an IFS vehicle over 2″ inches it will not drive or handle the same as a factory height vehicle. Additional noise, wear, tear and maintenance can be expected.

Buy This Kit Online

Front left view of a model Toyota Prado 120 fitted with a 3 Inch Profender Lift Kit
Front left view of a model Toyota Prado 120 fitted with a 3 Inch Profender Lift Kit

Front right view of a Prado 120 fitted with a 3 Inch Profender 4x4 Lift Kit
Front right view of a Prado 120 fitted with a 3 Inch Profender 4×4 Lift Kit

Rear side right view of a Prado 120 fitted with 3 inch Profender Mono-tube Remote Res struts and shocks
Rear side right view of a Prado 120 fitted with 3 inch Profender Mono-tube Remote Res struts and shocks

Rear side left view of a Prado 120 fitted with 3 inch Profender Mono-tube Remote Res struts and shocks
Rear side left view of a Prado 120 fitted with 3 inch Profender Mono-tube Remote Res struts and shocks

Toyota Prado 120 side view showing the new ride height after the suspension lift
Toyota Prado 120 side view showing the new ride height after the suspension lift

Left side view of the Toyota Prado 120 side view showing the new ride height after the 3 inch suspension lift has been fitted
Left side view of the Toyota Prado 120 side view showing the new ride height after the 3 inch suspension lift has been fitted

Contact Us (07) 5433 1411

Toyota Hilux IFS 4 Inch Profender Nitro Gas Lift Kit

This IFS Hilux has been fitted with the following 4×4 suspension components and accessories:

  • Toyota Hilux IFS 4 Inch Profender Nitro Gas Lift Kit (Stage 1)
  • Toyota Hilux IFS Diff Drop Kit
  • Toyota Hilux IFS Upper Control Arms

4 Inch Nitro Gas Profender Lift Kit (Stage 1)

Superior Engineering has put together a budget 4 inch lift kit to suit current model Hilux’s / Vigo With Profender Nitro Gas shock absorbers and front struts.

The kit comprises of the following parts:

  • 2 x Rear leaf springs
  • 2 x Front coil springs
  • 4 x U-bolts
  • 12 x Poly bushes
  • 2 x Extended rear shackles
  • 2 x Front Profender Nitro Gas struts
  • 2 x Rear Profender Nitro Gas Shocks
  • 1 x Extened rear brake line (2012 on models with traction control will need 2 x rear brakelines)
  • 1 x Swaybar relocation kit
  • 1 x Diff drop kit
Nitro Gas Profender Lift Kit (Stage 1)
Nitro Gas Profender Lift Kit (Stage 1)
Right side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit
Right side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit
Side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit
Side view of Toyota Hilux IFS fitted with a 4 Inch Profender Nitro Gas Lift Kit

Warning: When lifting an IFS vehicle over 2″ it will not drive or handle the same as a factory height vehicle. Additional noise, wear & tear and maintenance can be expected. For more information on how this kit may affect your vehicle please contact us (07) 5433 1411.

Find Out More About This Kit

Diff Drop Kit to Suit Toyota Hilux 2005 to Current Model

The diff drop brackets are designed to drop the diff lower to fix the cv angle.

If you have lifted your Toyota Hilux (2005 onwards) truck this Diff Drop Kit will allow the re-alignment of the diff reducing wear on your CV Joints.

Superior Engineering Diff Drop Kit to Suit Toyota Hilux 2005 to Current Model
Superior Engineering Diff Drop Kit to Suit Toyota Hilux 2005 to Current Model
View This Diff Drop Kit Online

Upper Control Arms (UCA’s) For Toyota Vigo / Hilux

These upper control arms are designed to correct the balljoint angle when you lift your vehicle over 2″ inches.

Superior Engineering have also allowed clearance for the coil to clear the arms during articulation and strengthened the whole unit over the standard parts.

These arms are made in Australia by Superior Engineering to suit the needs of the Australian market.

Made from 38.1 mm OD Heavy wall 4130 Chromoly tube and then powder coated in a hard wearing silver finish.

Durable poly bushes are used at the chassis end and we use the highest quality FK bearing joints at the wheel end, allowing for the maximum range of movement without binding.

All moving joints are greasable for a long service life.

Superior Engineering  Upper Control Arms (UCA) For Toyota Vigo / Hilux
Superior Engineering Upper Control Arms (UCA’s) For Toyota Vigo / Hilux
Superior Engineering  Upper Control Arms (UCA) For Toyota Vigo / Hilux
Superior Engineering Upper Control Arms (UCA’s) For Toyota Vigo / Hilux
Call (07) 5433 1411

Comments

  1. Marc [Customer] May 04, 2015 at 7:28 am

    Subject: Toyota Hilux IFS 4 Inch Profender Nitro Gas Lift Kit

    Hi.

    Could you send me a quote please for hilux vigo 2011, 4 door.

    1. Profender 4×4 [Post Author] May 04, 2015 at 12:31 pm

      Hi Marck

      The kit you are looking at is as follows:

      • 2 x Rear leaf springs
      • 2 x Front coil springs
      • 4 x U-bolts
      • 12 x Poly bushes
      • 2 x Extended rear shackles
      • 2 x Front Profender Nitro Gas struts
      • 2 x Rear Profender Nitro Gas Shocks
      • 1 x Extened rear brake line (2012 on models with traction control will need 2x rear brakelines)
      • 1 x Sway Bar Relocation Kit
      • 2 x Superior Engineering Upper Control Arms
      • 1 x Diff Drop Kit

      We have emailed you a price for the lift kit, including fitting and free freight. Please refer to the email.

      Regards Chris