Coilover Strut OEM Performance Series 2.5

Coilover Strut OEM Performance Series 2.5

Coilover Strut OEM Performance Series 2.5 – Piston 60 mm, Rod 22 mm, Outer shell 66 mm.

Chrome +3 finished
Min Pressure 100 psi
Max Pressure 200 psi

The Profender 4×4 OEM performance 2.5 Strut is a high performance bolt in solution for your strut front 4×4.

Based around the Profender 2.0 mono tube smoothie shock with a treaded body for fine tuning of the spring preload & ride height, supplied with a machined billet alloy strut top, preload adjuster and lower strut leg  finished in stunning blue hard anodizing that compliments the hard chromed body and piston rod.

The coil comes fitted to the strut to ease installation, this coil is suited to vehicles with light weight accessories (e.g. alloy bar and no winch), and heavier coils will be made available soon.

The specs of the OEM performance struts are comparable with any other 2.5 OEM/Factory Performance series strut with a 60mm high flow piston and a 22mm hard chromed piston rod.

Preload adjustment is locked in place with a pinch bolt style set up ensuring that once the preload is set, it will stay that way until you change it again.

The OEM Performance Struts use high quality spherical bushings suited to each specific application provide long service life and smooth operation.

When comparing the price of the Profender OEM Struts to any off the shelf preassembled or unassembled aftermarket struts the OEM struts still come out in front, Buying all the required parts and struts to complete the installation prices can easily exceed $1000 and you may still need specialised equipment to assemble the strut prior to installation.

Profender OEM Struts use the easily available 2.5 coilover coils, for a more compact coil, giving more clearance for the upper Control Arms.

Features:

  • Supplied in fully assembled, ready to bolt in and go
  • Fully Rebuildable design
  • 60mm High Flow design Piston
  • 22mm Piston hard chromed Rod
  • 145mm of Preload/Height Adjustment
  • Hard Anodized Billet Strut Top, preload Adjustment Nut & Strut Leg
  • 66mm Chrome Outer Shock Body
  • Preload adjustment locked with Pinch Bolt
  • Lower complete cost then the leading competitors
  • Better Coil to Upper Control Arm clearance(20mm smaller diameter the standard HD coils)
Contact Us For More Information

SPECIFICATION

Coilover Strut OEM Performance Series 2.5 Spec Table
Vehicle ModelMounting
OEM TOYOTA VIGO 4wd FRONT STD + UP 2” BEARING
REAR TOYOTA VIGO 4WD UP 2” BUSH
OEM ISUZU V-Cross 4×4 FRONT STD + UP2”BEARING
REAR ISUZU V-Cross 4WD UP 2”BUSH
OEM FORD NEW RANGER 4wd FRONT STD + UP 2”BUSH
REAR FORD NEW RANGER 4WD UP 2”BUSH

Coilover Strut OEM Performance 2.5 Series Top Hat
Coilover Strut OEM Performance 2.5 Series Top Hat
Coilover Strut OEM Performance 2.5 Series Coil Springs
Coilover Strut OEM Performance 2.5 Series Coil Springs
Coilover Strut OEM Performance 2.5 Series Lower Mount
Coilover Strut OEM Performance 2.5 Series Lower Mount

Buy These Online

3 thoughts on “Coilover Strut OEM Performance Series 2.5”

  1. Hi. May I know the type of shock absorber to use for Hyundai Tucson 2011 please. I am using the Kayaba type right now and I get dizzy during long travels because ang feeling ko para akong idinuduyan sa biaje.

  2. I have a PX II Series Ford Ranger Wildtrak and I am looking at putting a 2″ lift kit into the car.
    Will these coil over strut type shocks serve the purpose ?
    Can you please provide a price on 2 ?
    Also you mentioned the pressures, I do not want to change the characteristics of the ride of the car and I am unsure of the STD shock set up, any information you can advise on for the pressures would be greatly appreciated

    1. Good Morning Darrin.

      Thank you for your enquiry into OEM Profender Coilover struts for your PX II Ford Ranger.

      We currently do not have stock of any 2.0 or 2.5 OEM Coilover Struts to suit the PX Ranger. At this point we only have Toyota Hilux 2.0 OEM Struts Available.
      I can contact Profender to determine an ETA and price of you like?

      Right now we can offer adjustable Ironman 4×4 struts for the front of your Ranger.
      These struts retail for $286 ea. A pair of coils will vary in price depending on brand (roughly $190-$250 per pair) with replacement tops coming in at $70 ea.
      You can find these struts at the link below –
      https://www.superiorengineering.com.au/4×4-suspension/shock-absorbers/ironman-4×4-foam-cell-pro-strut-50mm-lift-fronteach-24801?filter=364,355

      If you have any further questions about the struts, or setting up your PXII Ranger, please do not hesitate to email me back.

Leave a Reply

Your email address will not be published. Required fields are marked *